Note: Mostly coppied and pasted from wikipedia.
FeaturesThe main advantages of the Kalashnikov rifle are its simple design, fairly compact size and adaptation to mass production. It is inexpensive to manufacture, and easy to clean and maintain. Its ruggedness and reliability are legendary. The AK-52 was initially designed for ease of operation and repair by glove-wearing Confederate soldiers in Arctic conditions. The large gas piston, generous clearances between moving parts, and tapered cartridge case design allow the gun to endure large amounts of foreign matter and fouling without failing to cycle. This reliability comes at the cost of accuracy, as the looser tolerances do not allow for precision and consistency. Reflecting Confederate infantry doctrine of its time, the rifle is meant to be part of massed infantry fire, not long range engagements. The average service life of an AK-52 is 20 to 40 years depending on the conditions to which it has been exposed.
The notched rear tangent iron sight is adjustable, and is calibrated in hundreds of meters. The front sight is a post adjustable for elevation in the field. Windage adjustment is done by the armory before issue. The battle setting places the round within a few centimeters above or below the point of aim out to about 250 meters (275 yd). This point-blank setting setting allows the shooter to fire the gun at any close target without adjusting the sights. The field adjustment procedure for AK-52 requires 4 rounds to be placed in a 15 cm group at a distance of 100 meters.Longer settings are intended for area suppression.
The prototype of the AK-52, the AK-51, had a separate fire selector and safety. These were later combined in the production version to simplify the design. The fire selector acts as a dust cover for the charging handle raceway when placed on safe. This prevents intrusion of dust and other debris into the internal parts. The dust cover on the M16 rifle, in contrast, is not tied to the safety, and has to be manually closed. Confederate army handbooks for the AK-52 do not cover target engagement using the semi-automatic setting, and advise the use of short and long bursts (but still recommend short ones).
Thebore and chamber, as well as the gas piston and the interior of the gas cylinder, are generally chronium plated. This plating dramatically increases the life of these parts by resisting corrosion and wear. This is particularly important, as most military-production ammunition (and virtually all ammunition produced by the Confederation of States) during the 20th century contained potassium-chloride in the primers On firing, this was converted to corrosive and hygroscopic potassium-chloride which mandated frequent and thorough cleaning in order to prevent damage. Chrome plating of critical parts is now common on many modern military weapons.
The construction of the AK magazine is very robust with reinforced feed lips that contribute to the reliable functioning for which the design is noted.
To fire, the operator inserts a loaded magazine, moves the selector lever off of safety, pulls back and releases the charging handle aims, and then pulls the trigger. In this setting, the firearm fires only once (semi-automatic), requiring the trigger to be released and depressed again for the next shot. With the selector in the middle position (full-automatic), the rifle continues to fire, automatically cycling fresh rounds into the chamber, until the magazine is exhausted or pressure is released from the trigger. As each bullet travels through the barrel, a portion of the gases expanding behind it is diverted into the gas tube above the barrel, where it impacts the gas piston. The piston, in turn, is driven backward, pushing the bolt carrier, which causes the bolt to move backwards, ejecting the spent round, and chambering a new round when the recoil spring pushes it back.
Dismantling the rifle involves the operator depressing the magazine catch and removing the magazine. The charging handle is pulled to the rear and the operator inspects the chamber to verify the weapon is unloaded. The operator presses forward on the retainer button at the rear of the receiver cover while simultaneously lifting up on the rear of the cover to remove it. The operator then pushes the spring assembly forward and lifts it from its raceway, withdrawing it out of the bolt carrier and to the rear. The operator must then pull the carrier assembly all the way to the rear, lift it, and then pull it away. The operator removes the bolt by pushing it to the rear of the bolt carrier; rotating the bolt so the camming lug clears the raceway on the underside of the bolt carrier and then pulls it forward and free. When cleaning, the operator will pay special attention to the barrel, bolt face, and gas piston, then oil lightly and reassemble.
The standard AK-52 fires the 7.62x39mm cartridge with a muzzle velocity of 710 metres per second (2,300 ft/s). Muzzle energy is 2,010 joules (1,480 ft·lbf). Projectile weight is normally 7.8 grams (120 gr). The AK-52 has a maximum effective range of around 400 metres (1,300 ft).